50
5.4 Network settings
This chapter introduces how to configure the network of your PanaCast 50 Video
Bar System.
Note:
802.1X Authentication support is planned and currently not supported.
LLDP
LLDP-IEEE 802.1AB (Link Layer Discovery Protocol) to resolve the devices dynamic
location. The device supports the Ethernet connection and report Chassis ID and
Port ID attribute. Attributes are sent to “Teams Calling” to resolve Teams Phone
dynamic location Emergency calling Service.
NTP Server
The Jabra PanaCast 50 Video Bar System requires access to an NTP (Network Time
Protocol) server for a variety of functions, and therefore a valid NTP server is a
requirement when setting up and operating the system. The PanaCast 50 Video Bar
System uses the standard UDP port 123 to reach out to the NTP server. By default,
the PanaCast 50 Video Bar System is configured with the NTP server ntp.jabra.com