Jabra Elite Active 65t - Titanium Black
How do I pair my Jabra earbuds with my mobile device?
To pair with your mobile device for the first time, follow these steps.
1. Turn on the Bluetooth setting on your handheld mobile device.
2. When you unpack your Jabra earbuds from the box, turn them on by
pressing and holding the
Multi-function
button on the right earbud (1
second) until the LED flashes green.
The earbuds enter pairing mode automatically.
3. Go to the Bluetooth menu on your mobile device and select the Jabra
earbuds to complete the pairing. Alternatively, wear the earbuds to
hear the voice guided instructions.
Enter “0000” (four zeros) if you are asked for a pin code.
If pairing is successful, your earbuds will appear in the list of
connected Bluetooth devices on your mobile device. The Bluetooth
connection will also be announced in the earbuds.
To re-pair with your mobile device or pair with an additional mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your handheld mobile device.
2. Start with the right earbud turned off and in your hand (not in the
charging case). To turn off the right earbud, press and hold (5
seconds) the
Multi-function
button, until the LED flashes red.
3. To enter pairing mode, press and hold (5 seconds) the
Multi-function
button until the LED flashes blue.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra product from the list. Alternatively, wear the earbuds to
hear the voice guided instructions.
Enter “0000” (four zeros) if you are asked for a pin code.
When you take the left earbud out of the charging case, it will
17/02/2024 16:37
https://www.apac.jabra.com/supportpages/jabra-elite-active-65t/100-99010002-
40/faq/8ec1bcdc-9b43-465e-b2c8-1faac22ef6f8
Page 1 of 3
