Jabra Link 14201-17
How do I connect my headset with a Polycom IP 320, IP 321, IP
330, IP 331, IP 335, IP 430, IP 450, IP 550, IP 560, IP 650, or VVX
series so I can answer and end the call electronically?
Requirements:
Jabra Pro 9450 Midi, Jabra Pro 9450 Flex, or Jabra Pro 9450 Flex Duo
with the latest firmware installed
Jabra Link 14201-17
Jabra 8800-00-75 (for Polycom IP 320, IP 321, IP 330, or IP 331)
Used in combination with one of the following Polycom desk phones:
SoundPoint IP phones running: SIP software v 3.0 or later, and
BootROM 4.1.0 or later
Polycom IP 321, IP 331 running: SIP software v 3.1.2 rev. C or later
Polycom IP335 running: SIP software v 3.1.2 rev. B or later
VVX series running: SIP software v 3.1.2 rev. B or later, and BootROM
4.1.2 or later
To connect your headset with your desk phone, use the following steps:
1. Plug one end of the EHS adapter into the serial port on the back of
your phone.
2. Plug the other end into the Jabra base socket marked
AUX
.
3. Connect the RJ-9 connector of the headset to the Jabra base marked
with a phone icon, and connect the other end to the back of the
phone marked with a headset icon (use cord Jabra 8800-00-75 for
SoundPoint IP phone models 320, 321, 330, or 331).
09/03/2024 17:30
https://www.mea.jabra.com/supportpages/jabra-link-14201-17/14201-
17/faq/6bbfceb3-7635-426e-a2f4-a1dcfdd86c00
Page 1 of 4
