
JK-16 PROFI
1/4
MGK24401
JK-16 PROFI
•
Installation instructions - only Jablotron distributor certified installers should install this kit.
•
Detailed manuals for all included components can be found on the enclosed CD or on the Jablotron website
www.jablotron.com
1. Kit contents
All items in the kit are enrolled and preprogrammed. The
detectors and remote controls have batteries pre-installed.
Item
description
address
JA-60N
wireless door sensor
1
JA-60P
wireless motion detector
2
JA-63F
wireless keypad
c1
RC-44
remote control
c2
UC-260
wireless indoor siren
panel is enrolled
The
RC-42
is the same remote
control as the
RC-44
except
that it is built into a housing with only two buttons (
&
), which
have identical functions to the left pair of RC-44 buttons.
2. Before installation
Decide upon suitable locations for all of the devices. The
wireless keypad should be within 20m of the control panel.
There should be power and a telephone line available for the
control panel.
3. Control panel installation
a)
Install the control panel
- see the drilling template on the
last page of this manual.
b) Install and
connect the backup ba
ttery to the control panel
c) Connect the
AC power
to the control panel
d)
The Green LED
should flash in the control panel
e) Connect the
keypad’s batteries
(pull out the red tape to
activate batteries).
P will be indicated
on the keypad
(programming mode).
•
If F is indicated, there is no communication with the control
panel.
•
Enter
F0 6060 to re-enter P mode
if you accidentally exit it
by pushing the N key
To save the keypad batteries, close its cover.
RESET
Green LED