Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 24 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
Hand press
Heat gun or small butane/propane torch with a soft pencil flame
Micrometer and internal measuring tools, must read up to 100mm
Multimeter or an ohmmeter
Spring scale: must read up to 2.5kg in 0.1kg increments
Thread taps: 1/4", 5/16”, 3/8” UNF and UNC
Valve seat cutters: 30°, 45° and 60°
Valve spring compressor, motorcycle type or a ‘G’ clamp with a machined spring cup
3.7.4 General:
Bearing blue, sometimes referred to as Prussian blue
Brass drifts, punches, rags, soft mallet, hammers
Greases: molybdenum disulphide, general purpose
Loctite compounds: 242/243/262 ThreadLocker, 515 Sealant, 620 Retainer, 7471 Cure Accelerator
Lubricants: engine oil, Nulon L90
TorqueSeal brand security marking compound