Jabbla Zingui, Руководство пользователя

Страница: 32 / 36

Zingui
26
6. Press the button of your remote control of the code you want the IR module
to learn (in this case the IR code for television volume up).
7. Keep the button pressed until the red light in the Gewa window turns off or
the status line in the Gewa window displays Release.
8. This procedure will be repeated in order to learn the code for a second time:
The red light in the IR window will turn on again and the status line will ask
to press the (same) remote control button again. The unit is now waiting for
you to send the IR code for a second time. Press the same button on your
remote control again.
9. Keep the button pressed until the status line displays Release. The IR
module now has recorded the code a second time.
The red light will blink shortly to confirm that the record procedure has been
finished successfully. In the status line an OK will appear.
Repeat this procedure from (4) for all other command that you want to use.
8.2 Transmitting IR codes
To send IR codes with the Zingui you have to link the command Send Gewa to a
cell.
1. Go to Edit > Edit Mode.
2. Choose a GEWA subcommand.
• Type command: if you want to type a specific GEWA command you can do
so by entering the GEWA command immediately in the field that is
foreseen beneath.
• Select Pause if you want to insert a pause between two GEWA commands.
This can be useful to make TV channel selections like for instance TV
channel 39. Pause allows you to add a pause after sending the
corresponding IR code. Insert the Duration of the Pause in milliseconds.
• Choose one of the commands you already have programmed.
3. Tap OK to confirm.
8.3 Making a backup file of the GEWA commands
This option is meant as a backup function of the GEWA commands. If any
problem occurs, you can restore the GEWA commands with your backup file.
This can also be useful in case you want to use different GEWA command sets
for different locations. You can program the GEWA with the commands for
location A and make a backup file once it's programmed for location A. You can
do the same for location B. Using backup and restore, this allows you to switch
the GEWA command set based on your location.
How to make a backup of the GEWA commands?
1. Go to Tools > GEWA > Back up.
2. Following window, asking to give the backup file a name, appears on the
screen. Enter a name for this backup file, for example gewa_home.
3. Tap OK to confirm. Next message appears on the screen:
4. Select Yes. A sandglass appears while the files are being saved.
How to restore the GEWA backup?
1. Go to Tools > GEWA and select Restore Backup.