Jabbla Mobi 3, Руководство пользователя

Страница: 21 / 54

Mobi 3
1 Switching on the Mobi
Figure 9: On/off button with a capacitative screen
Figure 10: On/off button with a resistive screen
Press the on/off button (2).
If the device was in sleep mode, it can be used immediately. If the device was switched off, then Windows must be started first.
See also
Shutting down the Mobi on page 32
Resetting the Mobi on page 31
2 Charging the Mobi
The amount of time you can use your device without needing to charge it depends greatly on how you use it:
▪ the audio volume
▪ the time set before the device reverts to sleep mode
▪ your Bluetooth and WiFi use
If the device is used a lot, it is recommended to recharge it every day. To do this, use only the supplied power adapter. The device can still be used while
charging.
Charge the device preferably at room temperature (about 20 °C / 68 °F). Temperatures lower than 5 °C (41 °F) and higher than 45 °C (113 °F) can have a
negative effect on the battery.
1. Check the power status. See Viewing the power status on page 20.
2. Connect the supplied power adapter between the device (11) and the power supply.
The battery charge indicator will light up and remain amber while charging. The battery charge indicator is green when the battery is fully charged.
E Control
1 Switching on the Mobi
19