PRODUCT
ASSEMBLY
AND
INSTALLATION
GUIDE
PAGE
1
J2 PET Felt Horizontal Acoustic Cloud
www.j2systems.net
(801) 701-7979
PANEL ASSEMBLY
1.
Place the panel face down on a clean, dry, flat surface (an “X” can be found in the corner
of the panel on the back.) Place L brackets according to diagram A on panel (2” from
edge of panel.) Ensure that the leg of the bracket with the most pre-drilled holes attaches
to the back of the panel (the leg with fewer holes will be used to suspend the panel.) Use
the screws (x18) to fasten L brackets to the back of the panel as shown in diagram A.
Do not over-tighten screws.
Diagram A
2.
Determine mounting location on ceiling. Attach cable to hardware mounted to substrate
(not included) using the looped end.
