INSTRUCTIONS BEGIN ON THE NEXT PAGE
1. Read all safety notes and mounting guidelines before installing
the product. Verify that all parts listed under “In the Box” are
present and complete.
2. Inspect the product for damage. DO NOT install the product if
there is any damage. Contact the authorized retailer where you
purchased it to initiate a warranty claim if there is damage.
3. Verify that all power supply and/or charging systems comply
to the specified voltage limits for the light.
PRODUCT WARRANTY:
If you have issues with a J.W. Speaker product, please
contact the authorized retailer where you purchased it.
INSTALLATION INSTRUCTIONS
To properly install this headlight you should have a good understanding of automotive electrical procedures and systems, and
proficiency in the installation of headlights.
IF YOU DO NOT, PLEASE SEEK PROFESSIONAL ASSISTANCE.
BEFORE INSTALLATION:
REGULATORY COMPLIANCE:
PRE-INSTALLATION GUIDELINES:
J.W. Speaker’s Model 9800 is best suited for normal snow
plowing,
not
"high speed" plowing on highways. Consult with
your J.W. Speaker salesperson for more information.
The Model 9800 is
not
designed to be a plug and play for Boss
snow plows. If you have a Boss snow plow please see your local
Boss dealer for information on the right product to use.
IMPORTANT NOTES:
Tools Needed:
Estimated Time:
Wire Functions:
In the Box:
Input Voltage:
Operating Voltage:
3/8" Socket/Wrench (For Mounting)
13mm Socket/Wrench (For Aiming)
30 minutes
Black = Ground
Red = Front Position
White = High Beam
Orange = Low Beam
Yellow = Turn Signal
Blue = DRL
*
*NOTE: Blue Wire is non-functioning on DOT versions
A. (x2) Mounting Bases
B. (x12) M8-1.25mm Hex Nuts
C. (x8) 1/4"-20x0.75" Hex Head Flange Bolts
D. (x2) Mounting Brackets
E. (x4) M8-1.25"x25 Carriage Bolts
F. (x8) M8-1.25"x25 Hex Head Flange Bolts
G. (x4) M8 Split Lock Washers
12-24V DC
10-30V DC
A
B
B
G
D
E
F
C
Model 9800
