8
HDCP Mode
Put the switch
4
on the “
ON
” position to select
HDCP Active
mode, or on the “
OFF
”
position for
HDCP Passive
mode.
Switch Status
Mode
HDCP
OFF (0)
Passive
(Default)
Automatically follows the HDCP version of source
device.
ON (1)
Active
⚫
If the input video has HDCP content, the HDCP
version of HDMI output is HDCP 1.4 for broader
video solution.
⚫
If the input video has no HDCP content, the HDMI
output has no HDCP too.
ARC Mode
The front panel of receiver provides a buttons to enable or disable ARC mode, as
below figure shows:
Press the button with paper clip or other sharp tool to enable the ARC mode, and then
the left LED illuminates blue. Press it again to exit the ARC mode and the LED is off.
ARC Mode
Display (e.g.TV)
Audio Transmission Path
ON
ARC is supported
The TV audio is transmitted from the TV back
to the receiver via HDMI cable, and then it
will be output by the
ARC Audio Out
port of
transmitter.
ARC is not supported
Connect the TV to the
ARC Audio In
port of
receiver with an audio cable. The TV audio is
transmitted from the TV back to the receiver
via the audio cable, and then it will be output
by the
ARC Audio Out
port of transmitter.
Note that if the ARC mode is ON, the
Audio
Breakout
port of receiver has no audio
output.
