J+J J4C S20, Руководство пользователя

Страница: 88 / 91

08 GENERAL ADVISE
HANDBOOK_
GENERAL ADVSE_
88
Transportation:
The transport to the installation location should always take place in a fixed packaging. Do not
carry the actuator on the hand wheel and do not attach any hoists to the hand wheel.
Entry control:
Check directly after delivery the actuator for possible damages in transit and faults. Don´t leave
any parts in the packaging. Check on the bases of the delivery note and the type label at the
actuator whether the delivered goods correspond to your order.
Storage:
Store the actuators in well ventilated, dry rooms. They must be protected against humidity, dust,
dirt, temperature change and solar radiation. If a storage is not possible under the described
conditions, the built-in control room heater has to be wired actively. For this purpose, the actuator
must be connected to the mains voltage corresponding to the voltage indicated on the nameplate.
Damages in transit:
Claims for damages related to shipping damage are immediately reported to the delivering trans-
port company. The transport packaging should be kept. Customize a damage report for return
(due to damage / repairs). Damage claims can be made only as asserted.
Return the delivery, after agreement, back to us, if possible with their original packaging und and
completed return form. Send us the document via fax or mail. After our approval send you the
goods together with the return document and return material authorization number to our servi-
ce department.
INDEX