Introduction
QuickView LED Display
Zone Thermostat LEDs
HVAC LED
Panel LED
Zone Damper LEDs
The iWD3P zoning system has been installed to improve your
comfort by regulating airflow to each zone to maintain the
comfort level you set on each zone thermostat. To improve
energy usage use higher cooling and lower heating
temperatures in spaces that are not being used regularly.
The multi-color LEDs help you determine the status of your
zoning system quickly without removing the cover on the
zoning panel.
Heating Request
Cooling Request
Heating
Normal Operation
Damper closed
Cooling
Minor Fault
Damper fully open
Fan ventilation
Fan ventilation
Major Fault
Damper partially open.
Red or blinking red.
Red or blinking red.
Blinking Green.
Off.
Green or blinking green.
Green or blinking green.
Blinking yellow.
Green.
Yellow.
Yellow or blinking yellow.
Off, red or blinking red.
Blinking green.
MENU
MENU
CANCEL
CANCEL
NEXT
NEXT
PDM Programming/Display Module
PDM Programming/Display Module
SAVE
SAVE
UP/YES
UP/YES
DOWN/NO
DOWN/NO
eControls
Model iWD3P
HVAC
PANEL
ZONE DAMPERS
1
1
2
2
3
3
ZONE THERMOSTATS
Q
u
ic
k
V
ie
w
iWD3 Zoning Panel
Using PDM to Display Information
Vacant/Vacation Mode
The PDM is used to select vacation mode, display the
contractor’s and manufacturer’s name and telephone number,
error messages and the panel status.
MENU
MENU
NEXT
NEXT
SAVE
SAVE
PDM Programming/Display Module
PDM Programming/Display Module
CANCEL
CANCEL
UP / YES
UP / YES
DOWN / NO
DOWN / NO
eControls
iWD3P V102
Contractor
Info Y/N
In menu selections the available keys are shown. The
Cancel key can be used to exit the menu.
Momentarily pressing the MENU key displays the first
User menu selection.
No (N) key is used to navigate through the menu
selections or turn the Vacation mode off.
Yes (Y) key is used to navigate through the menu
selections or turn the Vacation mode on.
LCD display normally displays the manufacturer,
model number and version.
The CANCEL can be used to exit the display menu.
Pressing the SAVE key is used to turn the vacation
mode on or off.
The NEXT key is used to navigate through the menu.
1
1.
2
2.
3
3.
4
4.
5
5.
6.
6
8
7.
7
8.
Revised 9/15/13
Zone
Intelligent Zoning
User Guide
Model iWD3P
eControls
Vacation or Vacant mode can be used when the building or
home is going to be vacant for a period of time. The Zone1
thermostat will now control all the zones and the HVAC
equipment. Change the Zone1 thermostat to Hold mode if it is
a programmable thermostat and set energy efficient heating
and cooling temperatures.
The vacation or vacant mode can be controlled by the PDM on
the panel or by an SW01 Occupied/Vacant switch if it is
installed. The SW01 will override the PDM vacation/vacant
mode selection.
