The Z8 Encore! XP
®
F64XX Series Development Kit
UM028301-0317
6
Z8 Encore! XP
®
F64XX Series Development Kit
User Manual
3. With the USB A (male) to Mini-B cable, connect Port P1 on the F64XX Series Devel-
opment Board to a USB port on the development PC to apply power to the Develop-
ment Board.
Start the Z8F64XX Demonstration Program
The F64XX Series Development Kit includes a sample program that demonstrates a blink-
ing LED application. An optional terminal emulation program and a 3rd Party USB to
TTL Serial converter (not supplied) maybe used and must be configured for 57600-8-N-1
with no flow control, as described in the
To get started with the Z8F64XX demonstration, observe the following procedure.
1. Launch ZDS II by navigating from the Windows Start menu to
Programs
→
Zilog
ZDS II – Z8 Encore! <version>
→
ZDS II – Z8 Encore! <version>
.
Figure 3. Debug Connector J3
