IXXAT Econ 100, Руководство по оборудованию, Страница: 17 / 22

Connections and displays
Pin no. X300 Signal
1 GND
2 +3.3 V
3 GND
4 TMS
5 GND
6 TCK
7 GND
8 TDO
9 GND
10 TDI
11 GND
12 not connected
13 GND
14 PS SRST#
Table 3-14: Pinout JTAG interface
3.4.5 Expansion port
On the X800 expansion port, there are freely available connections to the pro-
grammable logic of the Zynq component. Table 3-15 lists the assignment of
the expansion port to the connections of the Zynq. The supply voltage carried
on the connector is the filtered input voltage used to operate the IXXAT Econ
100. The +3.3 V voltage is the +3.3 V voltage generated on the IXXAT Econ
100.
Copyright IXXAT Automation GmbH
17
IXXAT Econ 100 hardware manual,
version 1.3