Configuration tool
6.1.2 Loading and saving a configuration
The configuration is loaded from a file via
“File -> Open“
.
The current configuration can be edited and saved in the same file with
”File ->
Save“
. If the configuration should be saved in a different file, use
”File -> Save
as...“
.
6.1.3 Setting up a connection
In order to configure the device, the serial port of the switched off CANlink II and
the serial port of the PC must be connected with the cable supplied. Please select
“Device -> Connect ...“
.
Copyright IXXAT Automation GmbH
CANlink II - Manual, V1.3
34
