Download tool
5 Download
tool
The Windows console program CANL2cfg.exe and alternatively the Windows ap-
plication CANL2cfgGUI.exe are available for configuration of the CANlink II.
5.1 Configuration with Windows console program
The program is operated via call parameters. The following possibilities are avail-
able to run the program
•
In Windows you can change to the path of the program CANL2cfg.exe via
“Start – Run – Browse“. Select by clicking and add the required parameters.
•
You can open a DOS box under “Start – Programs – MS-DOS-Prompt“, change
to the directory containing the program CANL2cfg.exe and then run it with the
corresponding parameters.
•
You can create a batch file or a link.
Copyright IXXAT Automation GmbH
CANlink II - Manual, V1.3
29
