Aluminum Version
2.1.2 Serial interface RS232 (X2)
The serial interface is used for configuration of the CANbridge. The signals of the
serial interface are connected to the 9-pin Sub-D connector X2 (see Table 2-2).
Pin no.
X2
Signal
1 DCD
2 RX
3 TX
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Table 2-2: Pin allocation RS232
2.1.3 CAN 1 (X3)
CAN 1 is available on connector X3 with a bus interface according to ISO 11898-
2. The signals of the bus interface are connected to the 9-pin Sub-D connector
X3 (see Table 2-3).
Pin no.
X3
Signal
1 -
2 CAN
Low
3 GND
4 -
5 -
6 -
7 CAN
High
8 -
9 -
Table 2-3: Pin allocation CAN1
Copyright IXXAT Automation GmbH
CANbridge - Manual, V1.4
9