Intake -
Intake draws water in a horizontal layer within 2 inches (5.08 cm) of the tank or reservoir floor. Chlorine boost
connection point on machine via 3/8” NPT female thread for adapting to 1/2” (13mm) hose for fast chlorine dispersion
during in-reservoir boosting.
Electrical Requirements -
120VAC motor requires 120VAC/1PH power source outlet
(minimum 20 Amp service)
. The
GS-12 draws approximately 9.0 Amps @ 120VAC / 60Hz. Nominal power consumption of 800 Watts.
Sealed Penetration Fitting -
T316 stainless steel tank fitting and cord grip included for sealed cord entry through
tank roof. Not designed as a submersible penetration.
Wiring -
Includes either 75 ft (22 m) of 12AWG or 150 ft (44m) of 10AWG submersible power cable to terminate
within junction box at top of tank. Junction box included.
Motor -
1/2 HP stainless steel submersible, designed for continuous operation, low power requirement,
direct drive, no gearbox and no lubrication schedule required. Automatic reset, on-winding thermal overload
protection and surge arresters built in. Mounted in flow sleeve for superior cooling and long motor life in
submerged temperatures up to 122 F. See certifications section below. 120VAC/1PH standard, other voltages
available as special order.
Figure 1:
GS-12
Technology Description-
GridBee
®
electric submersible water circulation equipment, designed for continuous operation.
Constructed with T316 stainless steel shell and safe materials for contact with potable drinking water. Designed to be
placed into service through roof hatch without tank entry.
Certifications
- Ixom’s potable water products are certified to ANSI/NSF Standard 61, and 372 for lead-free content.
Learn more at: www.medoraco.com/std61
Maintenance / Warranty
- Limited maintenance. Limited 5-year parts and labor warranty. See Warranty Statement for
details.
Optional Accessories
- (1) Portable Chlorine Boost Hose and Boost Pump System, (2) Dual Injection Kit,
(3) Control and SCADA Panel
Minimum Water Depth
- The mixer requires at least 2 feet
(0.6meters) of water above the discharge slots to prevent
pump cavitation and motor damage. Shut the mixer off if
water surface is less than 2ft from the mixer slots.
Materials of Construction
- T316 stainless steel shell and
hardware construction. UHMW-PE end plates for worry-free
safe contact with all tank surfaces. See certifications
section below.
75 ft (22 m) or 150 ft (44 m) of T316 stainless steel retrieval
chain included for machine installation and retrieval without
requiring tank entry.
Minimum Access Opening
- Machine can be placed
through 12 inch (30 cm) diameter opening.
Patent Pending
Subject to change without notice.
Shipping Size / Weight
75 ft unit -
Box 1 of 2: 44x16x12 in. / 88 lbs, Box 2: of 2: 17x13x8 in. / 25 lbs: Total shipment weight: 113 lbs
150 ft unit -
Box 1 of 2: 44x16x12 in. / 127 lbs, Box 2: of 2: 17x13x8 in. / 41 lbs: Total shipment weight: 168 lbs
© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]
Technical Data Sheet
GS-12
1572_10024_20200731
O&M_GS12_120V_1PH_10025_20200811 - 15
