Impeller Assembly -
The impeller assembly is made
up of the stainless steel impeller shaft, stainless steel
flag indicator, freeze sleeve, stainless steel impeller
blades, and plastic impeller bushing. The impeller
assembly is easily removed by pulling a pin on the
shaft coupling.
CAUTION: KEEP BODY APPENDAGES OR
LOOSE CLOTHING AWAY FROM THE IMPELLER
ASSEMBLY WHILE THE MACHINE IS OPERATING!
IF MAINTENANCE IS REQUIRED, BE SURE TO
TURN THE MACHINE OFF FIRST!
The flag indicator is fixed to the shaft and used as a
visual indicator of the impeller shaft's rotational speed.
An food grade oil-filled, Teflon freeze sleeve secured
with o-rings surronds the impeller shaft. The freeze
sleeve is free to rotate on the shaft. If the water should
freeze around the machine, the freeze sleeve will stand
still, frozen in by the ice, but inside the plastic sleeve,
the impeller shaft will be turning.
The impeller blades are welded to a hub that is
securely fastened to the impeller shaft. The impeller
is designed to gently pump water from below and can
handle up to 4-inch (10cm) spherical solids.
The impeller bushing is a smooth collar that the
impeller shaft tip fits into. The impeller bushing aligns
and centers the impeller shaft within the machine.
Turn Machine Off Before
Performing Maintenance
CAUTION
Moving blade.
Rotating parts and shaft can
cause injury.
Keep hands clear while
machine is operating.
Flag
Indicator
Impeller Blades
Impeller Hub
Freeze Sleeve
Impeller
Bushing
Block
Impeller Assembly
©2022 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]
Features
Features
SB and GF Large Frame Mixers
10267_20220110
O&M_GF2500_10115_20220121 - 7
