Hose Strainer Cleaning
In some applications where floating debris or
garbage is present in the pond, the hose strainer
may become plugged. In these applications, the
strainer will need to be cleaned on a regular basis
to maintain optimal performance of the Mixer.
TOOLS RECOMMENDED:
Rubber Gloves
Garbage Bag
STEP 1:
Turn Mixer off by placing the On/Off
switch into the OFF position.
STEP 2:
Locate the white float ball on one of the
floats. The float white float ball marks the chain
that attaches to the submerged strainer.
STEP 3:
Using rubber gloves, pull up on the chain
until the strainer is above the water. If there is
debris or garbage on the strainer, remove it, place
it in a garbage bag, and take it out of the pond to
prevent it from hanging up on the strainer again.
Follow all local laws and regulations when
disposing of any materials collected.
STEP 4:
Once all the garbage and debris are
removed, let the strainer sink back into place. It
is a good idea to setup your own schedule of
routinely checking the strainer for plugging based
on the amount of garbage and debris you find.
STEP 5:
Turn Mixer back on.
Partially Plugged Strainer
White Float Ball
Strainer Chain
Strainer
Strainer Hose And Chain
DIGITAL
CONTROLLER
ON / OFF
SWITCH
Model
May
Vary
©2022 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]
Maintenance
Hose Strainer Depth and Cleaning
SB / GF Series Mixers
2059_10262_20220110
O&M_GF2500_10115_20220121 - 28
