IXIA XG12, Инструкция по сборке

Страница: 14 / 19

Install XG12 Chassis
Figure: XG12 Chassis removing processor module
To insert the processor module:
1. Slide the module into the slot.
2. Pinch on the clips and push them in.
3. Fasten the screws.
Figure: XG12 Chassis inserting processor module
Remove and Insert Power Supply Module
The power supply module is accessible after removing the rear cover. For details see Fig-
ure: XG12 Chassis Back View .
To remove the rear cover, unfasten the four screws around the cover and pull out the
cover.
To remove the power supply module:
8 XG12 Chassis Assembly Guide, Release 8.20 EA