IXIA UHD100T32, Руководство по началу работы

Страница: 36 / 91

2. Enter the following credentials:
l
User ID: admin
l
Password: admin
The command line interface prompt appears.
3. Use the
kcos networking ip set mgmt0
command.
Usage:
kcos networking ip set mgmt0 <ip>/<subnet> <gateway>
For example:
kcos networking ip set mgmt0 10.36.81.43/22 10.36.80.1
4. Restart the fixed chassis for the changes to take effect.
Use the
kcos system reboot
command to restart the fixed chassis.
5. After you restart the fixed chassis, type exit to close the command line interface.
At the completion of this procedure, the UHD100T32 IP addressing would be similar to the configuration
in the KCOS console.
Set the system time
We recommend you to set the UHD100T32 system time by using an NTP server before you install any
licenses.
To set the time, do the following on the UHD100T32 KCOS console:
1. Open a serial connection, SSH connection, and then use the keyboard to connect to the KCOS
console.
2. Sign in with the following credentials:
l
User ID: admin
l
Password: admin
3. Do the following to set up the NTP server:
a. Enable or disable the NTP settings:
Usage:
kcos date-time ntp [command]
Available Commands:
Chapter 4 How do I...
– 21 – 913-2626-01