IXIA BreakingPoint 20, Руководство по установке

Страница: 47 / 65

Factory Revert
BreakingPoint 20 Installation Guide 36 BreakingPoint Systems Inc. © 2005-2015
18. Enter the user name you created in step
10
in the Username field.
19. Enter the password you created in step
13
in the Password field.
Note:
Passwords are case sensitive.
Note:
Access may require installation of the latest Adobe Flash player.
20. Click the Login button.
Note:
The system allows three invalid logins. If invalid login information is entered on the
fourth attempt, the login window will lock the user out. Users must refresh their browser
to unlock their accounts.
Factory Revert
A factory revert will roll the system back to the build (factory build) that was initially installed on it
and revert it back to its factory state. As a result, all settings, tests, and data stored on the system
will be removed.
The BreakingPoint 20 ships with an internal USB port that is pre-populated with a USB drive. The
pre-populated USB drive contains the latest factory image so you can easily revert your blade to its
original factory settings.
To perform a factory revert:
1. Go to the Administration screen and click the Restore button.
2. Select ExternalDrive/USB/eSata, and click the Fetch Backups button.
3. Locate and click on the file named Factory Image.
4. Click the Restore button to start the factory revert.
Note:
Note that all previous settings, stored tests, and reports will be wiped out by the factory
revert process. The revert process typically takes 10 – 15 minutes.
5. Using one of the provided serial cables, connect a computer running a terminal interface program
to the DB9 management port on the front of the 20.
6. Wait for the status LED to turn green.
7. Press Return. The End User License Agreement screen will be displayed on the serial console.
You can then go through the steps listed in the section Initial Configuration on page 35 .