IWISS HEAVY DUTY INDENT CRIMPING TOOL
For DEUTSCH Solid Pin & Socket Contacts
USING INSTRUCTION
Model Number: IWS-2612D
www
.
iwiss
.
com
www
.
iwiss
.
com
www
.
iwiss
.
com
www
.
iwiss
.
com
Crimp Contact
1. Squeeze the handles until the ratchet releases and the handles fully open, insert the contact.
2. Insert the stripped wire into the contact.
3. Squeeze the tool handles together until the ratchet releases, then allow the tool handles to
fully open.
4. Remove the crimped contact from the tool
JAW NUT
LOCATOR
POSITIONER
INSTALLATION
1. Rotate to install the positioner
2. Insert a terminal to check the depth you
3. Lock down the jaw nut
4. Porduce crimp as shown Figure 1 by
performing test crimps
MAINTENANCE
1.Clean tool and remove debris regularly.
2.Use GAGE in Dial Position 4/20 to check wear annually under normal conditions. Check more
often with high volume use.
PAGE 3/3