REL0.2
Page 99 of 110
Zynq-Ult MPSoC (ZU11/17/19EG) SOM Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.6.7
Reset Switch
The Zynq Ult MPSoC (ZU11/17/19EG) Carrier board supports Push button switch (SW1) to reset the Zynq Ult MPSoC
(ZU11/17/19EG) CPU. Reset signal of Board to Board connector2 Pin 35 is directly connected from Reset Push button switch. This Reset
Push button switch (SW1) is physically located at the top of the board as shown below.
Figure 35: Reset Switch