REL1.1
Page 86 of 89
iWave Systems Technologies Pvt. Ltd.
Zynq-Ult MPSoC SOM Development Platform Hardware User Guide
3.4.2
Guidelines to insert and remove the Zynq Ult SoC SOM with Carrier Board
The following section gives the details on inserting and removing of the Zynq Ult SoC SOM into the Carrier
Board.
•
Before inserting the SOM, make sure that the power is not provided to the Carrier Board.
•
Insert the Zynq Ult SoC SOM to the Board to Board Connectors (B2B) as shown below in the first
photo.
•
Confirm whether the positions of B2B1 and B2B2 of Zynq Ult SOM is matching with the Carrier
Board B2B Connectors while inserting.
•
Press the SOM in to B2B Connectors from the edges as shown below in the first photo such that the SOM
is fixed firmly into the B2B Connectors.
•
To remove the SOM from the Carrier Board, lift the SOM following the procedure as shown in the second
photo.
Figure 35: Zynq Ult SoC SOM Insert and Removal Procedure
