REL1.0
Page 79 of 106
RZ/G1H Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
3.2
RZ/G1H Camera Add-On Module Features
The RZ/G1H Camera Add-On Module has three expansion connectors to connect the RZ/G1H carrier board as shown
below and supports following features.
Video Features
8bit CMOS Camera (VIN0, VIN1, VIN2 and VIN3) x 4 Ports
16bit CMOS Camera (VIN0 & VIN1) x 2 Ports
Communication Features
CAN1 Header x 1 Port
10/100Mbps Ethernet Header (EtherMAC) x 1 Port
Serial Interface Features
Data UART RS232 Header (SCIF0, SCIF1, SCIF2, SCIFB1 & HSCIF0) x 5 Ports
General Specification
Form Factor
: 90mm X 60mm
Figure 31: Camera Add-On Module Expansion Connectors
Important Note: At a time either four 8bit cameras or two 16bit cameras only can be used and it can be selected
through Camera selection switch (SW1)
.
for guidelines to integrate Camera Add-On Module in to RZ/G1H Development
platform carrier board.
