iWave iW-RainboW-G20D, Руководство пользователя по оборудованию, Страница: 16 / 89

REL 1.0
Page 16 of 89
RZ/G1M/G1N Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Pin
No.
Qseven MXM
Connector Pin
Name
Signal Name
Signal Type/
Termination
Description
16 SUS_S5# SUS_S5_Q7 I, 3.3V CMOS S5 State.
This pin is connected to indication LED D9.
Note: This pin is optionally connected to
Expansion Connector3 (J14) 8
th
Pin.
17 WAKE# NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected from Push button
(SW5) in carrier board.
18 SUS_S3# SUS_S3_Q7 I, 3.3V CMOS S3 state.
This pin is connected to indication LED D12.
Note: This pin is optionally connected to
Expansion Connector3 (J14) 7
th
Pin.
19 SUS_STAT# SUS_STAT_Q7 I, 3.3V CMOS Suspend Status.
This pin is connected to indication LED D10.
Note: This pin is optionally connected to
Expansion Connector3 (J14) 10
th
Pin.
20 PWRBTN# PWRBTN# - Power Button output.
This pin is connected from Push button
(SW3) for SOM On/Off control.
21 SLP_BTN# NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected from Push button
(SW7) in carrier board.
22 LID_BTN# NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected from 8bit DIP switch
(SW2) 3
rd
position in carrier board.
23 GND GND Power Ground.
24 GND GND Power Ground.
25 GND GND Power Ground.
26 PWGIN PWRGIN O, 5V CMOS/
10K PU Power Good Output.
27 BATLOW# NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected from 8bit DIP switch
(SW2) 2
nd
position in carrier board.
28 RSTBTN# RSTBN O, 3.3V CMOS Active low Reset button Output.
This pin is connected from Push button
SW4 for reset.
Note: This pin is optionally connected to
Expansion Connector3 (J14) 12
th
Pin.
29 S NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected to 22pin SATA
Connector (J25) for SATA Channel0
Transmit differential pair positive.