Rev 1.1
Page 42 of 61
i.MX6 Pico ITX - SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.7.3
4bit DIP Switch
i.MX6 Pico ITX – SBC supports 4bit DIP Switch for General Purpose settings. This switch is connected to
i.MX6 CPU GPIOs and can be used for any optional setting changes. DIP Switch is physically located at
the top of the board.
Figure 18: DIP Switch
Table 20: 4bit DIP Switch setting
DIP Switch
Bit
Signal Name
Signal Type Voltage Level/
Termination
Description
Bit 1
GPIO4_24_STAT_PIN1(DI
SP0_DAT3)
Input to
CPU
3.3V CMOS
On – CPU GPIO Pin will go
High
Off - CPU GPIO Pin will go
Low
Bit 2
GPIO4_25_STAT_PIN2(DI
SP0_DAT4)
Input to
CPU
3.3V CMOS
Bit 3
GPIO4_26_STAT_PIN3(DI
SP0_DAT5)
Input to
CPU
3.3V CMOS
Bit 4
GPIO4_27_STAT_PIN4(DI
SP0_DAT6)
Input to
CPU
3.3V CMOS
