REL 1.0
Page 44 of 59
iWave Systems Technologies Pvt. Ltd.
iW-RainboW-G15M Android User Manual
The supported UART devices and it’s nodes are listed below,
UART 1 - /dev/ttymxc0
UART2 (debug) - /dev/ttymxc1
UART 4 - /dev/ttymxc3
UART 5 - /dev/ttymxc4
In case of data UART, Open another UART console in host PC and set the serial port settings as mentioned
below.
Bits per second: 9600 bps
Data bits: 8
Parity: none
Stop bits: 1 Flow control: none
To transmit data through the UART, Open the UART application, then Send and Receive the data through
UART (/dev/ttymxc0)
Figure 34: UART window
To change the device, use the provided option.