Iwata HP-C, Руководство пользователя

Страница: 14 / 20

REPLACEMENT PARTS AND ACCESSORIES
Nozzle (#3)
In time, the nozzle may wear or be damaged and may need to
be replaced.
1. Unscrew the handle (#17).
2. Loosen the needle chucking nut (#16).
3. Gently pull the needle (#4) part way back. It doesn’t need
to be fully pulled out.
4. Unscrew the nozzle cap (#2)
5. Unscrew the nozzle counter-clockwise with the provided wrench.
6. Screw the new nozzle into the airbrush body with your fingers.
7. Slightly tighten the nozzle with wrench. DO NOT
OVER TIGHTEN!
8. Screw the nozzle cap onto the airbrush body.
9. Push the needle all the way forward until it seats with
the new nozzle.
10. Tighten the needle chucking nut.
11. Screw the handle onto the airbrush body. TIP: Keep a spare
nozzle on hand for unforeseen accidents.
Needle (#4)
Iwata needles are precision ground, hardened stainless- steel
capable of withstanding prolonged use. They are, however, easily
physically damaged because of the long, tapered, extremely
fine tip. If the needle point becomes severely bent, it must be
straightened before pulling it back through the nozzle. If not, the
bent needle might damage the nozzle as it’s pulled through.
TIP: Keep a spare needle on hand for unforeseen accidents.
• Needles are sharp.
• Needle tips are bent easily.
Crown Cap (Optional Accessory)
The crown cap physically protects the needle while spraying very
fine lines.
• Protects the needle
• Replaces the needle cap (#1)
Quick Disconnect (Optional Accessory)
A quick disconnect joint is screwed onto the airhose and a quick
disconnect adapter is screwed onto each airbrush. When using
multiple airbrushes the quick disconnect joint facilitates changing
airbrushes on the same airhose quickly.
Pistol Grip Moisture Filter
The Iwata-Medea Pistol Grip Moisture Filter delivers clean, dry air
to your airbrush. Miniature in size, the super-fine, 5-micron filter
element performs like a full-size filter separator.
The clear filter bowl allows visual inspection of built up moisture.
Release the water by pulling the spring-loaded release valve.
12