Iwata HP-C, Руководство пользователя

Страница: 10 / 20

MAINTENANCE (CONT’D)
15. Place the needle chucking guide into the airbrush body.
a. Check the parts guide for proper orientation.
b. Pull the small tab forward.
c. Angle the needle chucking guide’s tail end slightly up.
d. Insert the needle chucking guide into the airbrush body.
e. The small tab should stick up slightly behind the
main lever.
16. Place the needle spring over the needle chucking guide.
17. Screw the spring guide into the airbrush body.
18. Push down on the main lever at least once.
19. Carefully insert the needle.
a. Warning: This is the most probable time to bend
the needle point.
20. Screw the needle chucking nut onto the needle
chucking guide.
21. Screw the handle back into the airbrush body.
DO NOT over-lube the air piston; transferring excess lube into
the air system may cause severe paint flow problems.
DO NOT use light machine oil or WD-40 for lubrication. These
lubes cause the needle to stick when it moves through the
needle packing o-ring.
CAUTION: If it becomes absolutely necessary to dismantle the
airbrush remember that most situations, unless otherwise
directed, do not require tools.
8