—
15
—
■
Reassembling Procedure
Follow the disassembling steps in reverse, while attending to the following points.
1
Position the gasket (19) corresponding to the gear case unit (47) as illustrated.
2
In attaching the gear unit (47), tighten the small screws (30) uniformly.
(Clamping torque : 1N·m)
3
If the O ring is flawed, replace it with a new one.
4
When the life of any of the consumable parts expires, replace the gear case
unit (47), gasket (10) and drive gear shaft (9) simultaneously.
gasket(10)
gear case unit(47)
