manualshive.com logo in svg

Ivoclar Vivadent Programat EP 5010, Руководство по эксплуатации

Поделиться
Скачать
Ivoclar Vivadent Programat EP 5010 Скачать руководство пользователя страница 64

64

5. Operation and Configuration

5.5  Multimedia functions

The Programat EP 5010 is equipped with multimedia functions such as photo display, MP3 and video player.
The furnace is also equipped with an internal memory. Images can be saved in this memory with the help of the  
"PrograBase X10" computer software. In order to use all multimedia functions without PrograBase X10, an external  
memory (USB flash drive or SD memory card) containing the corresponding data must be connected.

5.5.1  Image display

Scroll to page 2 in the home screen and press the 

[Images]

 button.

1. Select folder

The arrow keys are used to scroll through the folder. The folder can  
be opened by clicking the 

[Open]

 button.

2. Scroll though available image files

The arrow keys are used to scroll through the available image files. 

3. Select image

The desired image can be selected on the right side of the display. 
The left side of the display contains a preview. 

5. Switch to full screen view

The corresponding button is used to switch to the full screen view. 

4. Delete image

The image file can be deleted by tapping the 

[Recycling bin]

  

button. 

Содержание Programat EP 5010

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды