Ivoclar digital PrograMill Base, Руководство по эксплуатации

Страница: 57 / 144

Operating the Operating Panel
57
6.4.1 Tab [New]
In the Tab [New], all milling jobs transmitted by the Ivoclar Digital system solution to
PrograMill One, which are waiting for processing, are shown. In this tab, the processing order
is determined.
PrograMill One can be operated in Single or Multi mode:
• Single mode:
Fast processing of individual milling jobs
• Multi mode:
Preparation of up to 5 milling jobs for convenient, chronological processing without the
necessity of being present at the device.
You can transfer as many milling jobs as required to PrograMill One for later processing.
PrograMill One can process a maximum of 5 milling jobs in one milling sequence in the Multi
mode (5 blocks can be placed in the material and tool changer). This milling sequence can be
defined as required by the user. After successful processing of the 5 defined milling jobs, the
next 5 can be prioritized and prepared (see “Starting several milling jobs (Multi mode)”,
page 108).
1
6
7
2
3
5
4