Ivoclar digital PrograMill Base, Руководство по эксплуатации

Страница: 115 / 144

Editing Milling Jobs
115
7.9 Shutting the device down and switching it off
NOTICE! Switching the device off during a running milling job.
The milling machine stops in an uncontrolled manner.
The processing and changer arm is in the wrong position.
Danger of collision in the milling chamber at the start of a new milling job or the resumption
of a milling job.
Damage to the device.
Damage to the blocks or tools.

Do not pull the power supply plug during active processing.

Do not switch off the device during operation with the on/off switch.

Wait until the active milling processes have finished.

All active milling jobs have been successfully completed.

Sealing air has run for 20 minutes.
1. In the menu, select [Service - Shut down].
During the shut-down, the OSD ring blinks white, from the milling chamber towards the
On / Off switch.
2. Turn the On / Off switch at the back of
PrograMill One from
I to 0 .

The device is switched off.

During the system shut-down, the OSD ring will blink.

Once the system is shut down, the OSD ring will go out.