Program RF trigger to your PL series projector lift.
Program your iVisions RF trigger
The iVisions RF trigger connects your projector with your iVisions electrical projection screen or projector
lift. When you turn on your projector, the trigger will send a signal to your projector lift to go down.
When the projector turns off, it will send a signal to make the lift go up. This will also work when the
projector turns off automatically due to inactivity.
To program the trigger, please install the projector lift and projector first. When these are installed, you
can continue with this step-by-step plan.
Attention; programming the lift needs to be executed by an installer or technically competent person.
Attention; the RF trigger can activate the lift instantly after the programming. This will cause the lift to
go either up or down immediately. Make sure you keep your hands safely away from the moving parts
of the lift. It can cause serious injury!
