Ivation IVADM45 Скачать руководство пользователя страница 1

DEHUMIDIFIER WITH

AUTO HUMIDISTAT

User Manual

Introduction

Thank you for purchasing our Dehumidifier with Auto Humidistat, and welcome to the 
Ivation™ family. This user manual is meant to offer you a brief walkthrough of the device’s 
features and usage protocols. We hope you find this manual helpful. For additional 
information and technical support, please feel encouraged to contact our help team at
[email protected].

Important Instructions

Intended Use

This device is intended for use in the removal of excess moisture from small rooms such as
studies, walk-in closets and bathrooms. Other than the removable water tank, this device
is not user serviceable and should not be disassembled. Any use other than that
described above will lead to damage to the product and may present additional risks.

How Does it Work?

The Dehumidifier works by way of thermoelectric cooling, which uses what’s known as the 
Peltier effect to create a heat flux between the junction of two different types of materials. 
Using no compressors or moving parts, the device quietly pulls moisture from the air 
around it, removing muskiness and dampness from the room.

Safety Instructions

If damage is incurred as a result of non-compliance with these operating instructions,
manufacture’s guarantee will be voided. Ivation™ assumes no liability for personal injury
or damage to property caused by incorrect handling or non-observance of the safety
instructions.

1. Keep unit in upright position whenever in use.

2. To avoid electric shock, avoid opening unit.

3. Always turn device off when not in use.

4. Avoid using power adapter in excessively wet area.

5. Ensure that inlet and outlet grilles are unobstructed.

6. Use both hands when handling unit to avoid tilting.

7. Keep device away from reach of children.

Box Contents

1 x Dehumidifier
1 x Water Tank
1 x Power Cord
1 x User Manual

IVATION

HOME

1

Parts & Controls

1 On/Off 

Switch

2  Green “On” LED

3  Yellow “Full” LED

4  RH Level Display

5  RH Up/Down Buttons

6  Air Inlet Grill

7  Dry Air Outlet Grill

8  Carrying “Handle” Opening

9  Removable Water Tank

10  Tank Pull-Out “Handle”

11  Water Displacement Hole 
 w/Plug

12 Hydraulic Cut-Off

13  AC/DC Power Adapter

14  DC Power Socket

15  Rubberized Stability Feet

Operation

Basics:

- To remove excess moisture from small rooms, place Dehumidifier in preferred area.

- Insert smaller end of AC/DC Power Adapter (#13) into DC Power Socket (#14).

- Connect other end to wall socket.

- Toggle On/Off Switch (#1) to On position.

- To turn unit off at any time, toggle On/Off Switch (#1) to Off position first, then unplug 
AC/DC Power Adapter (#13).

Setting Relative Humidity Levels:

The Dehumidifier features an advanced humidistat function. Dehumidifiers without a 
humidistat stay on and work hard non-stop even if RH levels drop as low as 20%. This 
wastes energy and wears out the power adapters. With this Dehumidifier’s humidistat 
function, you can set your desired relative humidity level in the range of 40%-80%. When 
RH levels increase beyond your set level by a value of 5%, the machine automatically 
turns on. When RH levels decrease below your set level by a value of 5%, the machine 
automatically turns off. 

Note: You can override the humidistat and restart the machine 

by pressing and holding the DOWN button for 5 seconds once the machine turns off.

By default, the unit is set to 50% RH.

To set your desired level:

- Toggle On/Off Switch (#1) to On position.

- Wait a few seconds until RH Level Display (#4) reads current RH level.

- Depress the RH Up/Down Buttons (#5) to select your desired RH level.

- Display will flash ten times, then revert to showing current environment RH.

2

9

10

15

1

6

4

5

8

14

11

12

7

2
3

13

Emptying Water Tank:

- The Dehumidifier will automatically turn off once tank is full.

- The Yellow “Full” LED (#3) will turn on.

- Before removing water tank, toggle On/Off Switch (#1) to Off position.

- Insert two fingers into Tank Pull-Out Handle (#10) and gently pull out.

- Pull out plug from Water Displacement Hole (#11).

- Pour collected water out from tank into sink or toilet.

- Reinsert plug and slide tank back into device until it clicks.

- Device is now ready for use again.

3

Technical Specifications

Capacity: Approximately 25 Ounces/Day at 86°F, 80% RH

Water Tank Capacity: 2 Liters

Cooling Element: Thermoelectric Peltier Module

Fan: 90mm x 90mm High-Speed, Long-Life DC Brushless Motor w/Turbo Blades

Power Adapter: 12v DC 6Amp

Power Consumption: 72w

Water Level Detector: Auto-Off When Full w/Yellow “Full” LED

Working Environment: Over 59°F, Over 40% RH

Dimensions: 13.75” x 8.58” x 7”

Total Cord Length: 127” (10’ 7”)

Maintenance

Always turn the Dehumidifier off and disconnect power cord before cleaning unit. Use a 
piece of soft cloth to clean product surface, or use soft-bristled brush to wipe dust off air 
inlet grills.

Distributed by

C&A Marketing, Inc.

2 Bergen Turnpike
Ridgefield Park, NJ 07660
[email protected]

MADE IN CHINA

IVATION is a trademark of
C&A IP Holdings, LLC
©2014 All Rights Reserved

Отзывы: