PETITE DEHUMIDIFIER
User Manual
Introduction
Thank you for purchasing our IVADM10 Dehumidifier, and
welcome to the Ivation™ family. This user manual is meant
to offer you a brief walkthrough of the device’s features and
usage protocols. We hope you find this manual helpful. For
additional information and technical support, please feel
encouraged to contact our help team at [email protected].
Box Contents
1 x IVADM10 Dehumidifier
1 x Water Tank
1 x Power Cord
1 x User Manual
Parts & Controls
Important Instructions
Intended Use
This device is intended for use in the removal of excess
moisture from smaller rooms such as studies, walk-in
closets and bathrooms. Other than the removable water
tank, this device is not user serviceable and should not be
disassembled. Any use other than that described above
will lead to damage to the product and may present
additional risks.
How Does it Work?
The IVADM10 Dehumidifier works by way of thermoelectric
cooling, which uses what’s known as the Peltier effect to
create a heat flux between the junction of two different
types of materials. Using no compressors or moving parts,
the device pulls moisture from the air around it, removing
muskiness and dampness from the room.
Safety Instructions
If damage is incurred as a result of non-compliance with these
operating instructions, manufacture’s guarantee will be voided.
Ivation™ assumes no liability for personal injury or damage to
property caused by incorrect handling or non-observance of
the safety instructions.
1. Keep unit in upright position whenever in use.
2. To avoid electric shock, avoid opening unit.
3. Always turn device off when not in use.
4. Avoid using power adapter in excessively wet area.
5. Ensure that inlet and outlet grilles are unobstructed.
6. Keep device away from reach of children.
Operation
Basics:
- To remove excess moisture from small rooms, place IVADM10
Dehumidifier in preferred area.
- Insert smaller end of AC/DC Power Adapter (#11) into DC Power
Socket (#10).
- Connect other end to wall socket.
- Toggle On/Off Switch (#3) to On position.
- To turn unit off at any time, toggle On/Off Switch (#3) to Off
position first, then unplug DC Power Adapter (#11).
Emptying Water Tank:
- The IVADM10 Dehumidifier will automatically turn off once
tank is full.
- The Yellow “Full” LED (#2) will turn on.
- Before removing water tank, toggle On/Off Switch (#3) to
Off position.
- Insert two fingers into Pull-Out Opening (#7) and gently
pull out.
- Pull out plug from Water Displacement Hole (#8).
- Pour collected water out from tank into sink or toilet.
- Reinsert plug and slide tank back into device until it clicks.
- Device is now ready for use again.
Technical Specifications
Capacity: Approximately 6.08 Ounces/Day at 86°F, 80% RH
Water Tank Capacity: 16.9 Ounces
Cooling Element: Thermoelectric Peltier Module
Fan: 80mm x 80mm Brushless Motor
Power Adapter: 7.5v DC 1.8Amp
Power Consumption: 13.5w
Water Level Detector: Auto-Off When Full w/Yellow “Full” LED
Dimensions: 6.1” x 8.66” x 5.11”
Maintenance
Always turn IVADM10 Dehumidifier off and disconnect power
cord before cleaning unit. Use a piece of soft cloth to clean
product surface, or use soft-bristled brush to wipe dust
off air inlet grills.
Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgefield Park, NJ 07660
MADE IN CHINA
IVATION is a trademark of
C&A IP Holdings, LLC
©2014 All Rights Reserved
IVATION
HOME
1. Green “On” LED
2. Yellow “Full” LED
3. On/Off Switch
4. Air Inlet Grill
5. Dry Air Outlet
Grill
6. Removable
Water Tank
7. Pull-Out
Opening
8. Water
Displacement
Hole w/Plug
9. Hydraulic Cut-Off
10. DC Power Socket
11. AC/DC Power
Adapter
1
2
10
11
3
4
7
6
5
8
9