IV Produkt Envistar Top 04 Скачать руководство пользователя страница 14

Страница: 14 / 74

Page 10

Operation and Maintenance

Envistar Top 04-21

DSET.220501.07.en

Continuous product development may give rise to specification changes without notice.

3 Technical description

3.1 Envistar Top air handling unit

Envistar Top with counter-flow exchanger (code TEM)

Envistar Top with rotary heat exchanger (code TER)

Envistar Top is manufactured as a compact unit or modularly, depending on the

size and version selected.

The compact unit is supplied complete preassembled from the factory. Modular

units are supplied in parts to facilitate transport and entry and are assembled on

site

The unit is available in different sizes and in right-hand or left-hand versions. All

units have duct connections in the top (up). The units are equipped with either a

counter-flow exchanger (code TEM/TXM) or rotary heat exchanger (code TER/

TXR).

The units can be supplied with or without integrated control equipment.

Envistar Top (code TEM, TXM, TER, TXR) and Envistar Top with integrated Eco-

Cooler (code TEC-R, TEC-M) cooling unit or reversible heat pump ThermoCooler

HP (code TTC) are factory built units that are tested and documented in the fac-

tory.

3.2 Home Concept model

Units with a rotary heat exchanger or counter-flow exchanger in the

Home Concept versions have, among other things, specialised control

equipment such as automatic defrosting. Units with rotary heat exchangers are

also equipped with a pressure balance function for optimal rotor operation.

Содержание Envistar Top 04











































































Результаты поиска

Содержание Envistar Top 04

Отзывы:

Похожие инструкции для Envistar Top 04

Бренды по названию

Популярные бренды

IV Produkt Envistar Top 04, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Envistar Top 04

Отзывы:

Похожие инструкции для Envistar Top 04

Бренды по названию

Популярные бренды