Product design
ORBIMAT CA
| Operating instructions
14
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
(09.03.15) OW_ORBIMAT_CA_BA_871060202_04_EN
Article
Description
Version
Code
Figure
Oxygen Meter
ORB 1001
• To determine the residual oxygen in the
forming gases.
• Maintenance-free.
• Complete in a dust-and water-proof trans-
port container.
• User-definable settings of the switching
value for alarm and process control.
• Display in PPM.
• Acoustic signal if the set value has been
exceeded.
• RS-232 interface to the PC link.
• Integrated suction pump.
• Simple control of the forming gas in the
residual gas content.
• Can be used for ARGON and all common
forming gas mixtures (with the exception
of flammable mixtures)
230/115 V, 50/60 Hz,
1-phasig
882 000 001
Remote control with cable
Suitable for all ORBIMAT orbital welding
power supplies (the and ORBIMAT 300
CA AVC/OSC already include the remote
control).
Is required when connecting closed orbital
weld heads.
Cable length: 7.5 m (24.6 ft)
875 050 001
BUP Control Box
The power supplies of the ORBIMAT CA-
series offer the option in conjunction with
the BUP control attachment to adjust the
forming gas pressure in the inner tube via
a pressure sensor, which compensates
almost entirely for the often otherwise an-
noying entry of the seam weld into the sump
position. At the same time, the gas pressure
is modified automatically during welding
by the system between a programmable
minimum and maximum value depending on
the position of the electrodes.
Including ORBIPURGE forming set for tube
ID 12 - 110 mm (0.472" - 4.331").
For ORBIMAT 165 CA, 300 CA
886 000 001
Coolant OCL-15
Pre-Mix for ORBIMAT power sources and cool-
ing systems, to avoid freezing of the cooling
water. Protects undilated up to –15 °C (5 F)
degree.
Extended life of cooling system with corro-
sion protection and high pH-value.
Low conductivity. Clear coolant liquid.
Applicable for ORBICAR W, ORBICOOL Active,
ORBIMAT 165 CB and ORBIMAT 165 CA.
Canister with 2000 ml
(67.6 fl oz)
875 030 015
Durable carrying case
With castors. Protects the power supply
during transport. Ideal for use on construc-
tion sites.
For ORBIMAT 165 CB, 165 CA
875 050 002
For ORBIMAT 300 CB, 300 CA,
300 CA AC/DC
874 050 001
ORBIPURGE forming set
• The forming set for tube ID 12 - 110 mm
(0.472" - 4.331") includes all accessories
for fast and efficient internal forming dur-
ing orbital welding.
• The various stoppers match the internal
diameter of the tube exactly and therefore
from an optimally sealed forming gas
chamber.
• Complete with Teflon gas hose and rapid-
action couplings.
881 000 001
CompactFlash Card
For storing weld data protocols or for extend-
ing the program memory (one is already
included in the soft/hardware package.
Capacity to store over 5,000 welding pro-
grams.
875 012 056
