ITV DLK642Lite, Руководство пользователя

Страница: 24 / 32

24 Integrated Technical Vision Ltd http://www.itvsystems.com.ua
40 seconds pause between digits entry or cards passing causes panel switching to
main mode.
Door B time
Press [1] [4] [#] in code parameters programming mode, the panel reflects current
parameters settings by means of buzzer and LEDs. [#] button pressing switches
the panel to upper menu level. To set new parameters press [*] button and then
enter time in seconds (from 0 to 255) and press [#] . Factory default is 20.
The door will be open for unlimited time if you set time to 0 or 255 sec.
For example: Door B time setting is similar to door A time setting succession.
Programming Inputs
Press [1] [8] [#] in programming mode and introduce [input number] + [#] . Then you
can proceed with inputs type [1] [#] or attribute [2] [#] programming.
Inputs type
Press [1] [#] after you have chosen the number of input, the panel reflects current
input type by means of buzzer and LED 3. The panel switches to input programming
mode after
[#] button pushing. To introduce new settings press [*] then enter type
number (0 or from 18 to 29) and press [#] .
Inputs' types
[0] - input is not used,
[18] - door sensor,
[19] - RTE button,
[20] - both doors free pass access,
[21] - both doors blocking,
[22] - served by external program,
[23] - accumulator status,
[24] - ~220V status,
[25] - door A free pass access,
[26] - door B free pass access,
[27] - door A blocking,
[28] - door B blocking,
[29] - door sensor and RTE button.
If input type is set to the value from 1 to 17 or more than 19, the input is not used.
Inputs' attribute
Press [2] [#] you have chosen number of the input, the panel reflects current
input attribute by means of buzzer and LED 3. The panel switches to input
programming mode after
[#] button pushing. To introduce new settings press [*]
then enter attribute number (0 or 1) + [#] .
Input attributes
[0] - door A,
[1] - door B.
Programming the panel in stand-alone use