http://www.itvsystems.com.ua
Integrated Technical Vision Ltd
13
Access Denial
Access may be denied for the following reasons (LED lights red):
- Panel is not downloaded (LED does not light or blink)
- ID is not enrolled (red LED and buzzer switch on for a second)
- ID time expired (red LED and buzzer switch on for a second)
- Access is prohibited at the present moment/day (red LED and buzzer switch on for
a second)
- Attempt of repeated access with Antipassback function switched on (red LED and
buzzer switch on for a second)
- Lost or blocked ID is passed (red LED and buzzer switch on for a second)
- The panel is in Alarm mode (red LED lights uninterruptedly)
- The panel is in Blocked mode ( LED blinks red and yellow)
- Attempt of code matching (if the function was switched during programming)
In Alarm mode panel activates outputs assigned for Bell and Alarm. Alarm output
is deactivated when panel switches into a mode different to alarm.
Bell output is deactivated after programmed time.
If access point is in Alarm state it is prohibited to pass through this point. RTE
button unlocks a door.
To switch Alarm mode off pass ID card with “Alarm off” sign or give a command
from PC.
Alarm Mode
In alarm mode reader red LED lights constantly.
Access point switches into Alarm mode for following reasons:
- In case of door ajar
- Attempt of access with lost ID
- If door is opened too long (door time expired)
- In case of attempt of code matching (if switched on during programming).
Access point does not go into alarm mode in case of panel box tampering, alarm
output activates only.
You can forbidd access point change into Alarm mode in case of "Door opened too
long" event. The prohibition can be programmed for each door separately.
In alarm mode panel activates outputs assigned for BELL and ALARM. Alarm
output is deactivated when panel switches into a mode different to alarm mode
and it is recommended to program duration time for BELL output.
If access point is in alarm mode passing through this point is prohibited. RTE
button unlocks the door.
To switch alarm mode off pass ID with “Alarm OFF” sign or switch it off with
command from computer.
Control Panel Operation
