12
Integrated Technical Vision Ltd
http://www.itvsystems.com.ua
Jumpers and LED
-
RST - Reset jumper
- S3, S4, S6 - Jumpers for RS-485 load selection
- S5 - Tamper
- BAT - Real-time clock power switch
- S8, S9 - Reader mode (Wiegand/Special reader) setting jumpers
- VL1 - Live function indicator
Jumper BAT should be shorted before installation and broken during transportation
and storage.
Control Panel Operation
Control panels are supplied unprogrammed. In this state reader LEDs do not light.
VL1 panel yellow LED blinks 5 times per second. Panel does not respond to IDs'
passing and inputs' opening and closing. A panel should be downloaded to start
operation mode with DC Configurator or Golden Gate program.
Yellow LED starts to blink one time per second and switches to the main mode
automatically after successful settings' downloading.
Panel can be turned to the unloaded status only with command from PC, see
programming instruction.
Panel can control two independent access points. Each access point may be in
one of four modes: main mode, alarm, blocked or free pass. Free pass mode has
the highest priority, as panel switches to this mode in case of fire; then blocked,
alarm and main modes follow.
Main Mode
Panel grants or denies access to cardholders in this mode. In Main mode reader's
LEDs blink red.
Access with ID
To access the premises cardholder passes identificator to a reader. If it is valid a
panel grants access, unlocks a door and green LED switches on.
Access with ID and PIN
To access the premises cardholder passes ID to the reader. The panel checks
necessity of PIN entering and if it is necessary, reader starts to blink yellow, that
means PIN entering is awaited. After valid PIN entering door is unlocked, reader's
LED lights green.
Using RTE
To exit out of the premises with a single-sided door, users have to depress (press
& release) Request to Exit button. Reader and panel LEDs light green.
“Several IDs” access
To access the high security premises, bank depot for instance, the presence of
more than one person may be required. At least two people should enter the
depot, for example a board member escorted with a guard. You can program the
panel thus access will be granted after two cards of different groups are passed to
the reader.
Control Panel Operation
