Instruction for OEM:
a:Please provide below statement sontheend product user manual or on the product
。
b:This LMA does not have RF shielding and is tested and approved as standalone
configuration, additional evaluation may be required for any system integrated this radio
module.
c:The following regulatory and safety notices must be published in documentation supplied to
the end user of the product or system incorporating the WIFI module, in compliance with
local regulations. Host system must be labeled with "Contains FCC ID: 2AEU8
UB12
",
FCC ID
displayed on label.
d: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
e:This radio module must not installed to co-locate and operating simultaneously with other
radios in host system , additional testing and equipment authorization may be required to
operating simultaneously with other radio.
f: This module has data buffer.
g: This module has internal power regulation inside the chipset.
h: The modular has an integral chip antenna, it’s fulfil the requirements of 15.203.
i: The modular is tested in a stand-alone configuration powered by USB Port .
k: The modular complies with any applicable RF exposure requirements.
-
Rx Sensitivity
Data Rate (Mbps)
Sensitivity (dBm)
Legacy Mode
2412 MHz
2437 MHz
2462 MHz
2472 MHz
1L
-95
-96
-96
-95
6
-90
-91
-91
-90
11S
-90
-87
-87
-87
54
-76
-76
-76
-75
HT20 Mode
MCS 7
-73
-73
-72
-72
MCS 0
-90
-91
-91
-90
HT 40 Mode
2422 MHz
2437 MHz
2452 MHz
2457 MHz
2462 MHz
MCS 7
-69
-69
-69
-69
-69
MCS 0
-87
-87
-88
-87
-87
Pin Description
Pin
No.
Name
Description
1
GND
GROUND
2
USB_D+
USB D+ Signal
3
USB_D-
USB D- Signal
4
Vdd33
3.3V Power Supply
5
GND
GROUND
6
RFIN
RF interface
