CANNON STANDARD
page 2 of 20
ASSEMBLY AND WIRING INSTRUCTION
CA-BAYONET IP69K
Circular Connector with Protection Class IP69K
CAS25092E
Bearbeitet:
Geprüft:
Norm:
Änd.-Stand:
Änd.-Datum:
AKU/FA
AKU/FA
G5820W
JPE 18.12.2018
ITT Cannon GmbH, D-71384 Weinstadt
1 General Information
1.1 Scope
This wiring instruction describes the assembly of the Circular Connector with protection class IP69K, a
similar to CA-B connector with a sealing degree up to IP69K.
This connector is interchangeable with the corresponding types of VG95234, as they offer the same
mounting dimensions and contact arrangements.
These connectors are without spring washer and friction ring in the bayonet coupling nut and without
grommet and ferrule.
1.2 Recommended Method of Mounting
In combination with the Universal Endbell and an o-ring between the flange receptacle and wall, the
connector will reach IP68 (16h, 1 bar) and IP69K sealing. The flange receptacle is fixed with screws.
For dimensions of mounting, admissible wall thickness and admissible height of screw head see catalogue
and customer drawings.
1.3 Cross Reference
Further detailed information about wiring instructions, assembly aids, useful hints and other information
see on the Assembly Instruction MS / CA-Bayonet CAS25094E for ITT-Cannon Circular Connectors.
