ITT CA-BAYONET, Инструкции по сборке и подключению

Страница: 11 / 20

CANNON STANDARD
page 11 of 20
ASSEMBLY AND WIRING INSTRUCTION
CA-BAYONET IP69K
Circular Connector with Protection Class IP69K
CAS25092E
Bearbeitet: Geprüft: Norm: Änd.-Stand: Änd.-Datum:
AKU/FA AKU/FA G5820W JPE 18.12.2018
ITT Cannon GmbH, D-71384 Weinstadt
Table 2: wrench size and clamping torque of coupling nut
COUPLING NUT
cable sealing area wrench size clamping torque
D07 16 mm 1,0 Nm ±0,2
D09 19 mm 1,3 Nm ±0,2
D11 22 mm 1,7 Nm ±0,2
D13 25 mm 2,3 Nm ±0,2
D14 27 mm 3,0 Nm ±0,2
D17 32 mm 3,0 Nm ±0,2
D19 34 mm 3,5 Nm ±0,2
D20 36 mm 3,5 Nm ±0,2
5.2 Insertion of Contacts
1

Plug on and fix the connector for assembling.

Use therefore an assembly adapter or housing.
2

Assemble socket contacts sizes 15S/16S/15/16/12 and 25
only by using guide pins, see 3.3.

Insert guide pin into contact mating side.
3

Moisten the contacts with isopropyl alcohol for easier
contact insertion.
4

Pre-insert the contacts in the insulator.

Contact insertion is started in the center of the insulator.