©
C
op
yr
ig
ht
Ek
se
la
ns
, a
ll r
igh
ts
re
se
rved
V001
IPCOAX IPC-M User Manual
52 of 61
Confidential
Master Unit EKOAX IPC-M
•
System Running Status
: this block of information shows the items explained in the
following table:
Item
Description
Online Time
Time since the IPC-M was switched on.
Memory Size (kB)
Memory size of the IPC-M.
Remaining Memory (kB)
Current available memory in the IPC-M
Storage Space (kB)
Storage space of the IPC-M
Remaining Space (kB)
Current available storage space in the IPC-M
Space Utilization
Percentage of storage space used.
The Refresh button is used to update the information used in this pane.
•
CPU information logging settings:
here you can configure some parameters
related with the logging. They are explained in the following table:
Item
Description
CPU high usage rate threshold (%)
If the CPU usage rate is higher than the
configured value, a CPU high usage rate
entry will be registered in the log.
CPU high usage rate alarm interval (s) The time interval used to register the CPU
high usage rate alarm.
CPU low usage rate threshold (%)
If the CPU usage rate is lower than the
configured value, a CPU low usage rate
entry will be registered in the log.
CPU low usage rate alarm interval (s) The time interval used to register the CPU
low usage rate alarm.
Table
13
The Refresh button updates the information shown in this pane. The Modify
button allows to change the values set for these parameters.
2.7.3.
Slave Type
If you enter in the SYSTEM→SlaveType menu, the Picture is displayed.