ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
7
USER MANUAL
IPC M300
CNU list
Displays all the equipment connected to the master.
If any template is configured, the enable template option may be selected and then to apply the
template to the equipment that is wished to be configured.
Furthermore, if an individual configuration is wished to be made in the Action column, click on the "Mana"
button to go to the slave settings.
Slave configuration
By clicking on the "Mana" button, this accesses the slave. Various menus will be displayed where
different information may be obtained.
