www.itrackgpstrackers.com
11
6.18.
Data Load
The positions during the time of WCDMA/GSM signal loss will be sent to the server automatically when
WCDMA/GSM signals recover.
6.19.
Decide how many times of alarm message
For alarm messages sent in a cycle, you can decide how many times the alarm is sent via SMS. Send SMS
“
xtime+p005
”
to tracker, alarm message will be sent 5 times once alarms are triggered.
Alarm SMS will be sent 5 times by default.
6.20.
Alarm Functions
6.20.1.
Low Battery Alarm
Send the SMS command
“lowpspace+on”
and the tracker will send the
SMS “low
latitude/longit
ude” to
authorised numbers 2 times in total at 15-minute intervals when voltage of
battery is approximately 3.5V.
This function is activated by default.
To cancel: S
end SMS “lowpspace+off” to deactivate.
6.20.2.
External Power off alarm
Send SMS command
“epspace+on” to activate
and
it will send SMS “power
alarm+latitude/longtitude” to authori
sed numbers every 3 minutes when external power is cut off.
This function is activated by default.
To cancel: Send SMS command
“epspace+off” to deactivate it.
6.20.3.
GPS blind Spot alert
This function is deactivated by default.
Send SMS command:
“
gppspace
+on”
and the tracker will send alert SMS
“no gps+last valid
latitude/longitude before lost signal” when no GPS signa
l is received.
To cancel: Send
SMS “gppspace+off” to deactivate.
6.20.4.
SOS
Press the SOS button for 3 seconds and the tracker will send the
SMS “help me!+lat./long.” to all the
authorised numbers at intervals of 3 minutes. It will stop sending such SMS when any authorised number
replies with the
SMS “help me!” to the tracker.
6.20.5.
Geo-fence
6.21.5.1.
Set up a geo-fence for the tracker to restrict its movements within a boundary. The unit will send an SMS
to authorised numbers when it goes in or out of this boundary.
